Share this product

Eastwood Interstate Black Single Stage Automotive Car Paint Urethane Quart Kit

This product ad may change over time

Share

Eastwood Interstate Black Single Stage Automotive Car Paint Urethane Quart Kit

Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eas…

New content will be added above the current area of focus upon selection

Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eastwood Interstate Black has a gloss level of 95%+ which makes it the highest gloss black paint available with a super wet and deep shine. Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat settingThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

See more below

E

Eastwood.com

$84.98

Visit site

Description

Eastwood Interstate Black - The deepest, darkest, blackest black available.Ultra jet black pigments are finely ground and processed for extra time for maximum color development. Available only in single-stage, which is the best way to achieve a miles-deep appearance suitable for the most high-end refinish and restoration projects. Eastwood Interstate Black has a gloss level of 95%+ which makes it the highest gloss black paint available with a super wet and deep shine. Eastwood's premium Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability. Catalyzed urethane for unsurpassed durability; Highly resistant to UV rays, chemicals, chips; Makes 1 sprayable quart when mixed 3:1 with a required activator; Approximate coverage: 30 SQ FT;Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat settingThis premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow. SINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed.Use caution in mixing materials as Eastwoods single-stage urethane paint may begin to gel after approximately two hours (at 70 F). PAINT GUN SET-UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final fog coat may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes. This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwoods High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending. When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

Specifications

Formula	2-component topcoat system, blended with top-quality raw materials and advanced composition coatings technology, single-stage urethane paint with activator
Coverage area	30 SQ FT
Material	Acrylic urethane
Durability	Catalyzed urethane, highly resistant to UV rays, chemicals, chips
Drying Time	Dust free within 10-15 minutes, tack-free within one hour
Brand	Eastwood
Compatibility	Eastwood's High Solids Urethane Clear, Urethane Clear, Activator
Finish	Glossy, 95%+ gloss level
Resistance	Highly resistant to UV rays, chemicals, chips; paint will handle up to 300 degrees without delamination, but color shift may occur
Color	Interstate Black
Form	Liquid
Package Quantity	Quart kit
Package Contents	One quart of single-stage urethane paint, one quart of activator
Application Method	Paint gun
Application	Spray
Number of Coats Required	Two to three medium wet coats as necessary to achieve sufficient coverage
Features	Ultra jet black pigments, highest gloss black paint available, super wet and deep shine, exceptional long-lasting beauty and durability, can be wet-sanded and polished for increased depth and gloss, can be used as a stand-alone single-stage system or in combination with Eastwood's clear coats, can be applied with metallic colors to help set an even flake pattern and/or adjust flake orientation.
Coverage	30 SQ FT
Protection	Highly resistant to UV rays, chemicals, chips
Quantity	One kit
Purpose	Refinish and restoration projects
Product features	Ultra jet black pigments, highest gloss black paint available, super wet and deep shine, exceptional long-lasting beauty and durability, can be wet-sanded and polished for increased depth and gloss, can be used as a stand-alone single-stage system or in combination with Eastwood's clear coats, can be applied with metallic colors to help set an even flake pattern and/or adjust flake orientation.